Redesign and Performance Test of Liquid Fertilizer Based on Variable Rate Application on Chili Cultivation
DOI:
https://doi.org/10.23960/jtep-l.v13i2.339-349Abstract
Liquid fertilizer applicator based on Variable Rate Application (VRA) is a technology that is used to fertilize in a controlled and precise manner. This study aims to improve the effectiveness and efficiency of the fertilization process of chili plants. The development carried out is esp32 cam which serves to detect chili plants that lack elements. The method used is input of the nutritional needs of chili plants, spray doses of each plant, and a microcontroller to control applicator components such as sprayer pumps, selenoid valve, and esp32 cam. In this liquid fertilizer applicator there are 2 pipes, each pipe has 4 nozzles. The results of laboratory tests show that the discharge of liquid fertilizer sprayed follows the input results of the nutritional needs of chili plants. The discharge released on the PWM sprayer motor varies from 40 to 100% resulting in very different discharge variations in each PWM spray. The efficiency of this VRA-based liquid fertilizer applicator reaches 87% or an increase of about 14.7% from the applicator before development. Regression analysis of dimmer level to spraying discharge showed a function y = 6.3016x + 18.937 with an R 2 of 0.9921. While the regression analysis of the dimmer level of the applicator speed obtained the function y = 94.075x + 20.203 with an R2 of 0.9936.
Keywords: Chili plants, Liquid, Fertilizer, Applicator, VRA.
References
Arifin, S., & Fathoni, A. (2014). Pemanfaatan pulse width modulation untuk mengontrol motor (Studi kasus robot otomatis dua deviana). Jurnal Ilmiah Teknologi Informasi Asia, 8(2), 65–80.
Alghoffary, R. (2014). Sistem pengaturan kecepatan motor DC pada alat ektraktor madu menggunakan kontroler. Jurnal Seminar Hasil Universitas Brawijaya, January 2014: 6 pp.
Dharmawan, A., & Soekarno, S. (2020). Uji distribusi semprotan sprayer pestisida dengan patternator berbasis water level detector. Jurnal Teknik Pertanian Lampung, 9(2), 85-95. https://doi.org/10.23960/jtep-l.v9i2.85-95.
Fauzan, Y. (2020). Kotak Penerima Paket Berbasis IoT Menggunakan Modul ESP32-CAM. [Undergraduate Thesis]. Faculty of Science and Technology, Universitas Islam Negeri Syarif Hidayatullah, Jakarta.
Fuadi, M., Sutiarso, L. & Radi, R. (2021). Uji Kinerja dan implementasi aplikator pupuk cair berbasis variable rate application untuk tanaman kedelai (Glycine max). agriTECH, 41(2), 172-183. https://doi.org/10.22146/agritech.54828
Grisso, R.B., Alley, M., Thomason, W., Holshouser, D., Robersom,G.T. (2011). Precision Farming Tools : Variable-Rate Application. Virginia Cooperative Extension, 1–16.
Kamal, W., Syam, H., & Jamaluddin, J. (2021). Perancangan sistem pengendali kemudi otomatis traktor roda dua dengan penerapan FPV (First Person View). Jurnal Pendidikan Teknologi Pertanian, 7(2), 207-216. https://doi.org/10.26858/jptp.v7i2.19057.
Langlois, K. (2015). Polyhedral divisors and torus actions of complexity one over arbitrary fields. Journal of Pure and Applied Algebra, 219(6), 2015–2045. https://doi.org/10.1016/j.jpaa.2014.07.021.
Masganti (2011). Perbedaan daya serap hara beberapa varietas unggul padi pada tipe lahan berbeda di lahan pasang surut. Penelitian Pertanian Tanaman Pangan, 30(1), 23–29.
Muis, A.R. (2007). Penentuan faktor efisiensi kerja operator alat berat wheel loader. TeknikA, 28(1), 98–101.
Mustakim, M. (2015). Pengaruh kecepatan sudut terhadap efisiensi pompa sentrifugal jenis tunggal. Jurnal Teknik Mesin Universitas Muhammadiyah Metro, 4(2), 79–83. https://doi.org/10.24127/trb.v4i2.74.
Padmini, O.S., Virgawati, S., & Poerwanto, M.E. (2015). Teknologi pemupukan padi sawah dengan Variable Rate Application (VRA) dan aplikator gledur dalam pertanian presisi di Kabupaten Sragen. Prosiding Seminar Nasional Call Paper dan Pameran Hasil Pertanian dan Pengabdian Masyarakat Kmenristek Dikti RI.
Prabawa, S. (2006). Pendekatan precision farming dalam pemupukan N, P, dan K pada budidaya tebu: Studi kasus di PT Gula Putih Mataram. Prosiding Seminar Nasianal Teknik Pertanian 2008 – Yogyakarta, 18-19 November 2008: 15 pp.
Putra, B.T.W. (2019). Pertanian Presisi Untuk Agro Maritim. UPT Percetakan & Penerbitan Universitas Jember.
Rahutomo, S. & Ginting, E.N. (2018). Tingkat pencucian N, P, K dan Mg dari aplikasi beberapa jenis pupuk. Jurnal Penelitian Kelapa Sawit, 26(1), 37–47. https://doi.org/10.22302/iopri.jur.jpks.v26i1.35.
Rizal, M., Subrata, I. & Setiawan, R. (2016). Design and prototype testing of control systems of sprayer machine on variable dose for precision farming spraying application. Jurnal Keteknikan Pertanian, 04(2), 131-138.
Siswadi, S. (2016). Analisis tekanan pompa terhadap debit air. Jurnal Ilmu-Ilmu Teknik – Sistem, 11(3), 39-46.
Suherman, C., Mochamad, A.S., Nuraini,A., Fatimah,A.N. (2018). Pertumbuhan dan hasil tanaman cabai (Capsicum sp.) yang diberi pupuk hayati pada pertanaman kelapa sawit (Elaeis guineensis Jacq.) TBM I. Kultivasi, 17(2), 648–655. https://doi.org/10.24198/kultivasi.v17i2.18116.
Suwandi, N. (2009). Standard Operating Procedure (SOP) Budidaya Cabai Merah Gunung Kidul. Dinas Pertanian Provinsi DI Yogyakarta: 1–56.
Triady, R., & Triyanto, D. (2015). Prototipe sistem keran air otomatis berbasis sensor flowmeter pada gedung bertingkat. Jurnal Coding Sistem Komputer Untan, 03(3), 25–34.
Yamani, A. (2012). Analisis kadar hara makro tanah pada hutan lindung Gunung Sebatung di Kabupaten Kotabaru. Jurnal Hutan Tropis, 12(2), 181–187.
Downloads
Published
Issue
Section
License
- Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Teknik Pertanian Lampung
JTEPL is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.