Uji Kinerja Mesin Pengiris Singkong Tipe Vertikal
DOI:
https://doi.org/10.23960/jtep-l.v10i4.530-536Abstract
Several efforts to improve the efficiency and effectiveness of slicing cassava machine had been conducted. One of them including the development of a prototype cassava slicing machine. This machine has types and classification based on slicing capacity. The purpose of this study was to conduct a machine performance test (verification test, performance test, and ergonomics test), to compare its performance with SNI 0838-1:2014, to analyze the constraints of a vertical cassava slicing machine. A quantitative research approach and descriptive explanatory method were used by observing, measuring, and calculating, the testing of cassava slicing machine. Verification test was to check the suitability of the type and type of engine, motor, transmission type, slicing unit, engine frame, and other supporting components in accordance with the specifications. The performance results of the slicing machine displayed that its capacity was 18.51 kg/hour and performance efficiency of 74.05%. The slicing test obtained an average thickness was 0.73 mm, uniformity level of 64.2%, and damage rate around 9.67%. Ergonomics tests showed that the machine was quite in accordance with the comfort of the operator. There were some obstacles that need evaluations such as the difficulty in adjusting slicing blade, transmission, and technical specifications of the cassava slicing machine. Therefore, the cassava slicing machine needed improvement so that it conforms to the requirements that refer to SNI 0838-1:2014.
Keywords: cassava, performance test, slicing, slicing machine, testing
References
BPS (Badan Pusat Statistik) Kabupaten Bogor. 2021. Luas tanam, Produksi Ubi Kayu Kabupaten Bogor. Bogor: Badan Pusat Statistik Kabupaten Bogor
BSN (Badan Standardisasi Nasional). 2014. SNI 0838-1:2014 Mesin Pengolah Ubi Kayu Bagian 1: Mesin Pengiris Ubi Kayu- Syarat Mutu dan Metode Uji. Jakarta: Badan Standardisai Nasional
BSN (Badan Standardisasi Nasional). 2008. SNI 7412:2008 Mesin pencacah hijau pakan (chopper) - Unjuk kerja. Jakarta: Badan Standardisasi Nasional
Perhimpunan Ergonomi Indonesia. 2021. Rekap Data Antropometri Indonesia. https://www.antropometriindonesia.org/index.php/detail/artikel/4/10/data_antropometri [diakses pada 17 Desember 2021]
Azharul, F., Yandi, A., Firmansyah, A., dan Hadi, V. 2020. Perancangan mesin pengiris singkong. Jurnal Terapan Teknik Mesin, 1(2): 41-53. DOI: 10.37373/msn.v1i2.49
Handayani, T.H.W., dan Marwanti. 2011. Pengolahan Makanan Indonesia. Yogyakarta: Kementrian Pendidikan Nasional, Universitas Negeri Yogyakarta.
Husman, H dan Ariyono, S. 2018. Rancang Bangun Mesin pengiris Singkong. Jurnal ManuTech, 10(2): 31-34. https://doi.org/10.33504/manutech.v10i02.65
Pasaribu, A.J.P. 2017. Rancang Bangun dan Uji Kinerja Mesin Pengiris Talas. Skripsi. Program Studi Teknik Pertanian, Fakultas Teknologi Industri Pertanian, Universitas Padjadjaran, Jatinangor, Bandung.
Sateria, A., dan Darta, Y. 2020. Rancang bangun mesin pengiris keripik singkong. Jurnal NCIET, 1(1): A160-A165. DOI: https://doi.org/10.32497/nciet.v1i1.141
Suriadi, I.G.A.K., Subagia, I.D.G.A., dan Atmika, I.K. 2016. Penerapan mesin pengiris singkong pada industri kecil kripik singkong. Jurnal Udayana Mengabdi, 1 (2): 118-124
Sugandi, W.K., Kramadibrata, M.K.A.M., Widyasanti, A., dan Putri, A.R. 2017. Uji kinerja dan analisis ekonomi mesin pengupas Bawang Merah (MPB TEP-0315). Jurnal Ilmiah Rekayasa Pertanian dan Biosistem, 6(2): 440-451.
Widiyarta, I.M., Negara, D.N.K.P., dan Muku, I.D.M.K. 2018. Rancang bangun alat pemotong/pengiris bahan baku krupuk terigu dan kripik singkong. Jurnal Buletin Udayana Mengabdi, 17 (1): 187-191.
Downloads
Published
Issue
Section
License
- Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Teknik Pertanian Lampung
JTEPL is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
