RANCANG DESAIN ALAT PENGAYAK MODIFIED CASSAVA FLOUR (MOCAF) BERDASARKAN ANALISIS KEBUTUHAN, MORFOLOGI DAN TEKNIK
DOI:
https://doi.org/10.23960/jtep-l.v10i1.73-84Abstract
Modified Cassava Flour (MOCAF) which has been produced by small industries has a particle size that is not yet the Indonesian National Standard (SNI), so the quality needs to be improved using a sieving machine. The objectives of this study are 1) to analyze the design requirements of the sieving machine 2) to determine the design concept 3) to analyze the technique 4) to design the sieving device in the engineering drawing. The method used in this research is observation, interview and French design method. Based on the results of the needs analysis, it was found that the design concept of the MOCAF sieve tool that uses an electric motor, is easy to operate, is in accordance with the production capacity, has an SNI size mesh and the material used is affordable. The results of the morphological analysis show that the design concept that can be developed is the design concept 1. The results of the technical analysis show that the linear velocity of the belt is 5.58 m / s and the tensile stress at T1 is 0.23 MPa. The dimensions obtained based on the design results are 5 cm pulley length, 99 x 59 x 10 cm mesh dimension, 100 mesh size and 108 x 80 x 95 cm machine frame dimensions.
Keywords: analysis, design, MOCAF, morphology, sieving
References
Ãlvarez, A. and Ritchey, T. 2015. Applications of general morphological analysis. Acta Morph. Gen, 4(1): 1-40
Arta, A.D., Astuti, R.D. dan Susmartini, S. 2011. Perancangan Ulang Alat Mesin Pembuat Es Puter Berdasarkan Aspek Ergonomi. Performa: Media Ilmiah Teknik Industri, 11(2): 1-8
Badan Standarisasi Nasional (BSN). (2011). Standar Nasional Indonesia No. SNI 7622-2011 tentang Tepung Mocaf. Jakarta.
Choiriyah, N.A. and Dewi, I.C. 2020. Daya Terima Roti Tawar Mocaf dan Ubi Jalar pada Santriwati Pesantren X. Media pertanian, 5(1): 44-49
Darmajana, D.A., Ekafitri, R., Kumalasari, R. dan Indrianti, N. 2016. Pengaruh Variasi Ukuran Partikel Tepung Jagung terhadap Karakteristik Fisikokimia Mi Jagung Instan Effect of Particle Size Variation of Corn Flour on Physicochemical Characteristics of Instant Corn Noodle. Jurnal Pangan, 25(1): 1-12.
Dartnall, J. dan Johnston, S. 2005. Morphological analysis (MA) leading to innovative mechanical design. In DS 35: Proceedings ICED 05, the 15th International Conference on Engineering Design, Melbourne, Australia, 15.-18.08. 2005.
Ernaningtyas, N., Wahjuningsih, S.B. dan Haryati, S. 2020. Substitusi Wortel (Daucus carota L.) dan Tepung Mocaf (Modified Cassava Flour) Terhadap Sifat Fisikokimia Dan Organoleptik Mie Kering. Jurnal Teknologi Pangan dan Hasil Pertanian, 15(2): 23-32.
Gilang,R., Dian, R., Dwi. 2013. Karakteristik Fisik dan Kimia Tepung Koro Pedang (Canavalia ensiformis) dengan Variasi Perlakuan Pendahuluan. Jurnal Teknosains Pangan 2 (3): 34-42
Jufri, M. 2006. Studi Kemampuan Pati Biji Durian Sebagai Bahan Pengikat Dalam Ketoprofen Secara Granulasi Basah. Jurnal ilmu kefarmasian 3 (2): 78-86
Muttalib, S.A., Hidayat, A.F., haji Abdillah, S., ayu Widhiantari, I., Rozidi, R. dan Burhan, S. 2020. Pengembangan Desain Sprayer Buah menggunakan Quality Function Deployment. Jurnal Teknik Pertanian Lampung 9(2): 149-156.
Naldy, D. dan Akbar, M. 2016. Perancangan dan Analisis Struktur Mekanik Prototipe Mesin CNC Milling 3-Axis (Doctoral dissertation, Riau University). Pp.1-5
Nursyahuddin, D. dan Gasni, D. 2014. Proses Perancangan Sistem Mekanik dengan Pendekatan Terintegrasi: Studi Kasus Perancangan Alat Uji Pin on Disc. Teknika, 21(1): 14-29
Putri, A.E.V.T., Winarni, W. dan Susatyo, E.B. 2015. Uji proksimat dan organoleptik brownies dengan substitusi tepung mocaf (modified cassava flour). Indonesian Journal of Chemical Science, 4(3): 168-171
Sateria, A., Yudo, E., Zulfitriyanto, Z., Sugiyarto, S., Melati, R., Saputra, B. E., dan Naufal, I. 2019. Rancang Bangun Mesin Pengayak Pasir Untuk Meningkatkan Produktivitas Pengayakan Pasir Pada Pekerja Bangunan. Manutech: Jurnal Teknologi Manufaktur, 11(01): 8-13.
Subagiyono, A. dan Finahari, N. 2018. Perancangan Mesin Pengaduk Sas (Bahan Pokok) Gas Air Mata. Proton, 10(1): 6-12
Sugandi, W.K., Ruminta, Yusuf, A. Romey, T. 2020. Modifikasi dan Uji Kinerja Unit Penyosoh pada Mesin Penyosoh Biji Hanjeli (MPBH-2019). Jurnal Teknik Pertanian Lampung, 9 (2): 71-77.
Sularso dan Suga, K. 2002. Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: PT Pradnya Paramita.
Downloads
Published
Issue
Section
License
- Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Teknik Pertanian Lampung
JTEPL is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
