Uji Kinerja Alat Penghancur Kohe Kambing Tipe Basah

Authors

  • Aldi Saputra Universitas Lampung
  • Budianto Lanya Universitas Lampung
  • Siti Suharyatun Universitas Lampung
  • Agus Haryanto Universitas Lampung

DOI:

https://doi.org/10.23960/jtep-l.v10i4.440-448

Abstract

Goat manure is one of the manure which is widely used in agriculture. Due to its hard physical nature, goat manure needs to be crushed before being applied to facilitate the decomposition process. Currently, there is a wet type of goat dung grinder or crusher used by the community. This study aims to test the performance of the goat manure crusher based on the engine rotation speed (rpm). The research was conducted using 3 different rotation speed of the blade shaft, namely 968 rpm, 1208 rpm, 1454 rpm. The experiment parameters included working capacity, fuel consumtion, and degree of crushing. The results showed that the wet type goat manure crusher had the best working capacity at 1208 rpm blade rotation with 255,78 kg/h working capacity, 1.43 lt/h fuel consumption, and 99.3% crushing uniformity.

 

Keywords: manure, rpm, wet goat manure crusher

References

ASAE (American Society of Agricultural Engineers). 2003. Manure production and characteristics (Standard No. ASAE D384.1 FEB03): 4 halaman. Diakses dari http://large.stanford.edu/publications/coal/references/docs/ASAEStandard.pdf (16 August 2021).

Baharudin, B., Jie, S., dan Mustamin, M. 2017. Analisis pengaruh pembebanan terhadap karakteristik (unjuk kerja) motor induksi tiga fasa. Jurnal Fokus Elektroda : Energi Listrik, Telekomunikasi, Komputer, Elektronika Dan Kendali, 2(3): 1-5

Fadli, I. 2015. Pengujian mesin pencacah hijauan pakan (Chopper) Tipe Vertikal Wonosari 1. Jurnal Teknik Pertanian Lampung, 4(1): 35–40.

Hapsari, A. Y. 2013. Kualitas dan Kuantitas Kandungan Pupuk Organik Limbah Serasah Dengan Inokulum Kotoran Sapi Secara Semianaerob. [Skripsi]. Universitas Muhammadiyah Surakarta. Kota

Isnaini, M. 2006. Pertanian Organik: Untuk Keuntungan Ekonomi dan Kelestarian Bumi. Kreasi Wacana, Yogyakarta: 298 halaman.

Montgomery, D. C., dan Runger, G. C. 2018. Applied Statistics and Probability for Engineers. Wiley, Hoboken, NJ: 710.

Nulik, J., Fernandes, P. T., dan Rubiati, A. (n.d.). Uji Kerja Alat Penggiling Type Palu (Hammer Mill). https://ntt.litbang.pertanian.go.id/phocadownload/pdf06%2022.pdf (Akses 16 Agustus 2021)

Parnata, A. S. 2010. Meningkatkan Hasil Panen Dengan Pupuk Organik. Agro Media Pustaka. Jakarta: 146 halaman.

Rala, M. A. S., Asmara, S., dan Suharyatun, S. 2018. Pengaruh kecepatan putar terhadap unjuk kerja mesin pencacah pelepah Kelapa Sawit (Chopper) Tipe TEP-1. Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering), 6(3): 189–196.

Roidah, I. S. 2013. Manfaat penggunaan pupuk organik untuk kesuburan tanah. Jurnal Bonorowo, 1(1): 30–43.

Siboro, E. S., Surya, E., dan Herlina, N. 2013. Pembuatan pupuk cair dan biogas dari campuran limbah sayuran. Jurnal Teknik Kimia USU, 2(3): 40-43

Suprapti, S. 2018. Uji pupuk N dan macam bentuk pupuk kotoran kambing terhadap pertumbuhan dan hasil Kangkung. Agrineca, 18(2): 12-21.

Downloads

Published

2021-12-30

Issue

Vol. 10 No. 4 (2021): Desember

Section

Articles

License

    1. Authors who publish with this journal agree to the following terms:

        1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
        2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
        3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

        4. Jurnal Teknik Pertanian Lampung

          Creative Commons License
          JTEPL is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.