PENGEMBANGAN DESAIN SPRAYER BUAH MENGGUNAKAN QUALITY FUNCTION DEPLOYMENT
DOI:
https://doi.org/10.23960/jtep-l.v9i2.149-156Abstract
The aim of this research is to develop an specialty sprayer for fruits. It is expected that the sprayer will be able to assist farmers in improving the quality of the fruits. Sprayer is a pesticide applicator that is needed in eradicating and controlling plant pests and diseases. Problems that are often found in the sling type sprayer are the high weight of the sprayer and the short range of spraying so that it is not efficient nor effective for application with high trees. The purpose of this research is to develop the design of fruit sprayer using the Quality Function Deployment (QFD) method. The data generated were analyzed using House of Quality. Results showed that important weight values in the House of Quality analysis included the attributes of the spray lever, easeness of operation and easeness of moving with a score of 4.80, 4.46 and 4.50, respectively. Based on the analysis, the sprayer was developed using a wheel drive system with the addition of wheels and spray levers that can be extended or shortened by adjusting the spray lever knock.
References
Ad’ha A T, Setyaningrum R, Izzathi D W. 2017. Desain Alat Penggiling Kedelai Menggunakan Metode Qualityfunction Deployment (Qfd) Dengan Pendekatan Antropometri. Teknik Industri, Fakultas Teknik, Universitas Dian Nuswantoro Semarang
BPTP Yogyakarta. 2006. Penggunaan dan Perawatan Alat Semprot Punggung (Sprayer). Balai Pengkajian Teknologi Pertanian. Yogyakarta
BPS. 2018. Statistik Produksi Tanaman Hortikultura Provinsi Nusa Tenggara Barat 2017. Mataram : Badan Pusat Statistika Provinsi NTB.BPS. 2018. Statistik Tanaman Buah-buahan dan Sayuran Tahunan Indonesia 2017. Jakarta : Badan Pusat Statistika
Cohen, L. 1995. Quality function deployment: how to make QFD work for you. Prentice Hall.
Hermawan, W. 2012. Kinerja Sprayer Bermotor dalam Aplikasi Pupuk Daun. Jurnal Keteknikan Pertanian IPB 26( 2) : 91-98.
Juran, J. M.; Godfrey, A., B. 1998. Juran's quality handbook. New York: McGraw Hill.
Kementerian Pertanian. 2017. Laporan Kinerja Direktorat Jenderal Hortikultura T.A 2017. http://sakip.pertanian.go.id/admin/data2/LAKIN%20HORTI%202017.pdf. Diakses pada tanggal 15 mei 2020 pukul 21.19 WITA
Napitupulu, Robert dan Suzen Sirwansyah Zaldy. 2016. Pengembangan Mesin Pengupas Kulit Buah Aren. Jurnal Manutech 8 (1) :26-54
Santoso R, Jazuli, Yusianto. 2015. Perancangan Alat Hybrid Penggiling Daging, Pengaduk Adonan Dan Pencetak Bakso Menggunakan Metode Kansei Engineering Dan Quality Function Deployment (Qfd). Teknik Industri, Fakultas Teknik, Universitas Dian Nuswantoro Semarang
Wardani, L. K. 2003. Evaluasi Ergonomi Dalam Perancangan Desain. Dimensi Interior 1 (1): 61-73
Downloads
Published
Issue
Section
License
- Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Teknik Pertanian Lampung
JTEPL is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
